PLDT Prolink H5004N has two configuration modes that you can access to view and modify its settings – the first one is Basic and the other one is Advanced. The guide below will show you how to access each mode depending on what settings you’d like to change.
Access PLDT Prolink H5004N Configuration Page
First, open an internet browser – preferably the default. Enter 192.168.1.1 in the address bar then hit enter. A small pop-up window will appear like below.
Enter admin as the username then 1234 as the password. Type-in these values manually. Click OK.
On Basic Configuration page, only the Wireless Settings can be viewed and managed. That is where you can check the active devices connected to the modem, change the WiFi password under Security tab and any other relevant settings.
To access the entire settings of the modem, here’s what you need to do:
Relaunch your internet browser. You may try using another browser if you’d like. Same process – enter 192.168.1.1 in the address bar then hit enter.
In the Authentication window, enter adminpldt as the username then 1234567890 as the password. Click OK to proceed.
Voila! You have now accessed the advanced configuration page of the modem.
Here you can change a lot of settings aside from Wireless like DNS, IP/Port Filter, MAC Filter and etc.
Warning: Make sure to download the current firmware of the modem before changing its’ settings.